The order cancel/replace request is used to change the parameters of an existing order.
Do not use this message to cancel the remaining quantity of an outstanding order, use the Order Cancel Request message for this purpose.

Added in protocol FIX.2.7

See in: FIX.4.0, FIX.4.1, FIX.4.2, FIX.4.3, FIX.4.4, FIX.5.0, FIX.5.0SP1, FIX.5.0SP2.

Field or Component Name Description Is Required Added Is Deprecated
Block StandardHeader MsgType = G Y FIX.2.7
37 OrderID Unique identifier of most recent order as assigned by sell-side (broker, exchange, ECN). FIX.2.7
2422 OrderRequestID Required if provided on the order being replaced (or cancelled). Echo back the value provided by the requester. FIX.5.0SP2 (188)
BlockRepeating Parties This is party information related to the submitter of the request. FIX.4.3
BlockRepeating TargetParties Identifies parties not directly associated with or owning the order, who are to be informed to effect processing of the order. FIX.5.0SP2 (131)
229 TradeOriginationDate FIX.4.3
75 TradeDate FIX.4.4
41 OrigClOrdID ClOrdID (11) of the previous non rejected order (NOT the initial order of the day) when canceling or replacing an order.
Required when referring to orders that were electronically submitted over FIX or otherwise assigned a ClOrdID
FIX.2.7
11 ClOrdID Unique identifier of replacement order as assigned by institution or by the intermediary with closest association with the investor.. Note that this identifier will be used in ClOrdID (11) field of the Cancel Reject message if the replacement request is rejected. Y FIX.2.7
526 SecondaryClOrdID FIX.4.3
583 ClOrdLinkID FIX.4.3
66 ListID Required for List Orders FIX.2.7
586 OrigOrdModTime TransactTime of the last state change that occurred to the original order FIX.4.3
1 Account FIX.2.7
660 AcctIDSource FIX.4.4
581 AccountType FIX.4.3
589 DayBookingInst FIX.4.3
590 BookingUnit FIX.4.3
591 PreallocMethod FIX.4.3
70 AllocID Used to assign an overall allocation id to the block of preallocations FIX.4.4
ImplicitBlockRepeating PreAllocGrp Number of repeating groups for pre-trade allocation FIX.4.4
63 SettlType For NDFs either SettlType or SettlDate should be specified. FIX.2.7
64 SettlDate Takes precedence over SettlType value and conditionally required/omitted for specific SettlType values.
For NDFs either SettlType or SettlDate should be specified.
FIX.2.7
544 CashMargin FIX.4.3
635 ClearingFeeIndicator FIX.4.3
21 HandlInst FIX.2.7
18 ExecInst Can contain multiple instructions, space delimited. Replacement order must be created with new parameters (i.e. original order values will not be brought forward to replacement order unless redefined within this message). FIX.2.7
1805 AuctionInstruction FIX.5.0SP2 (131)
110 MinQty FIX.3.0
1822 MinQtyMethod FIX.5.0SP2 (131)
1089 MatchIncrement FIX.4.4
1090 MaxPriceLevels FIX.4.4
2676 MaximumPricePercentage FIX.5.0SP2 (223)
BlockRepeating ValueChecksGrp FIX.5.0SP2 (223)
BlockRepeating MatchingInstructions FIX.5.0SP2 (99)
2362 SelfMatchPreventionID May be used as an alternative to MatchingInstructions when the identifier does not appear in another field. FIX.5.0SP2 (218)
Block DisplayInstruction FIX.4.4
BlockRepeating DisclosureInstructionGrp Specifies instructions to disclose certain order level information in market data. FIX.5.0SP2 (131)
111 MaxFloor FIX.3.0 Y
1300 MarketSegmentID FIX.5.0SP2 (131)
100 ExDestination FIX.3.0
1133 ExDestinationIDSource FIX.4.4
2704 ExDestinationType FIX.5.0SP2 (228)
ImplicitBlockRepeating TrdgSesGrp Specifies the number of repeating TradingSessionIDs FIX.4.4
Block Instrument Insert here the set of “Instrument” (symbology) fields defined in “Common Components of Application Messages”
Must match original order
Y FIX.4.3
Block FinancingDetails Insert here the set of “FinancingDetails” (symbology) fields defined in “Common Components of Application Messages”
Must match original order
FIX.4.4
BlockRepeating UndInstrmtGrp Number of underlyings FIX.4.4
54 Side Should match original order’s side, however, if bilaterally agreed to the following groups could potentially be interchanged:
Buy and Buy Minus
Sell, Sell Plus, Sell Short, and Sell Short Exempt
Cross, Cross Short, and Cross Short Exempt
Y FIX.2.7
2102 ShortMarkingExemptIndicator FIX.5.0SP2 (164)
1688 ShortSaleExemptionReason Available for optional use when Side (54) = 6(Sell short exempt). FIX.5.0SP2 (121)
60 TransactTime Time this order request was initiated/released by the trader or trading system. Y FIX.4.2
854 QtyType FIX.4.4
Block OrderQtyData Note: OrderQty (38) value should be the “Total Intended Order Quantity” (including the amount already executed for this chain of orders). Y FIX.4.3
40 OrdType Y FIX.2.7
423 PriceType FIX.4.3
44 Price Required for limit OrdTypes. For F/X orders, should be the “all-in” rate (spot rate adjusted for forward points). Can be used to specify a limit price for a pegged order, previously indicated, etc. FIX.2.7
1092 PriceProtectionScope FIX.4.4
99 StopPx Required for OrdType = “Stop” or OrdType = “Stop limit”. FIX.2.7
Block TriggeringInstruction Insert here the set of “TriggeringInstruction” fields defined in “common components of application messages” FIX.5.0
Block SpreadOrBenchmarkCurveData Insert here the set of “SpreadOrBenchmarkCurveData” (Fixed Income spread or benchmark curve) fields defined in “Common Components of Application Messages” FIX.4.3
Block YieldData Insert here the set of “YieldData” (yield-related) fields defined in “Common Components of Application Messages” FIX.4.3
Block PegInstructions Insert here the set of “PegInstruction” fields defined in “Common Components of Application Messages” FIX.4.4
Block DiscretionInstructions Insert here the set of “DiscretionInstruction” fields defined in “Common Components of Application Messages” FIX.4.4
847 TargetStrategy The target strategy of the order FIX.4.4
ImplicitBlockRepeating StrategyParametersGrp Strategy parameter block FIX.4.4
848 TargetStrategyParameters For further specification of the TargetStrategy FIX.4.4 Y
849 ParticipationRate Mandatory for a TargetStrategy=Participate order and specifies the target particpation rate.
For other order types optionally specifies a volume limit (i.e. do not be more than this percent of the market volume)
FIX.4.4 Y
376 ComplianceID FIX.4.2
2404 ComplianceText FIX.5.0SP2 (185)
2351 EncodedComplianceTextLen Must be set if EncodedComplianceText (2352) field is specified and must immediately precede it. FIX.5.0SP2 (185)
2352 EncodedComplianceText Encoded (non-ASCII characters) representation of the ComplianceText (2404) field in the encoded format specified via the MessageEncoding (347) field. FIX.5.0SP2 (185)
377 SolicitedFlag FIX.4.2
15 Currency Must match original order. FIX.2.7
59 TimeInForce Absence of this field indicates Day order FIX.2.7
168 EffectiveTime Can specify the time at which the order should be considered valid FIX.4.2
432 ExpireDate Conditionally required if TimeInForce = GTD and ExpireTime is not specified. FIX.4.2
126 ExpireTime Conditionally required if TimeInForce = GTD and ExpireDate is not specified. FIX.4.0
427 GTBookingInst States whether executions are booked out or accumulated on a partially filled GT order FIX.4.2
1629 ExposureDuration Conditionally required when TimeInForce (59)=10 (Good for Time) FIX.5.0SP2 (100)
1916 ExposureDurationUnit FIX.5.0SP2 (159)
Block CommissionData FIX.4.3
BlockRepeating CommissionDataGrp Use as an alternative to CommissionData component if multiple commissions or enhanced attributes are needed. FIX.5.0SP2 (204)
528 OrderCapacity FIX.4.3
529 OrderRestrictions FIX.4.3
1815 TradingCapacity FIX.5.0SP2 (131)
1091 PreTradeAnonymity FIX.4.4
1390 TradePublishIndicator Applies to trades resulting from the order. FIX.5.0SP2 (131)
582 CustOrderCapacity FIX.4.3
BlockRepeating OrderAttributeGrp FIX.5.0SP2 (228)
121 ForexReq Indicates that broker is requested to execute a Forex accommodation trade in conjunction with the security trade. FIX.4.0
120 SettlCurrency Required if ForexReq=Y.
Required for NDFs.
FIX.4.0
775 BookingType Method for booking out this order. Used when notifying a broker that an order to be settled by that broker is to be booked out as an OTC derivative (e.g. CFD or similar). Absence of this field implies regular booking. FIX.4.4
58 Text FIX.2.7
354 EncodedTextLen Must be set if EncodedText (355) field is specified and must immediately precede it. FIX.4.2
355 EncodedText Encoded (non-ASCII characters) representation of the Text (58) field in the encoded format specified via the MessageEncoding (347) field. FIX.4.2
193 SettlDate2 Can be used with OrdType = “Forex – Swap” to specify the “value date” for the future portion of a F/X swap. FIX.4.1 Y
192 OrderQty2 Can be used with OrdType = “Forex – Swap” to specify the order quantity for the future portion of a F/X swap. FIX.4.1 Y
640 Price2 Can be used with OrdType = “Forex – Swap” to specify the price for the future portion of a F/X swap. FIX.4.3 Y
1816 ClearingAccountType FIX.5.0SP2 (131)
77 PositionEffect For use in derivatives omnibus accounting FIX.4.1
203 CoveredOrUncovered For use with derivatives, such as options FIX.4.1
210 MaxShow FIX.4.1 Y
114 LocateReqd Required for short sell orders FIX.4.1
480 CancellationRights For CIV – Optional FIX.4.3
481 MoneyLaunderingStatus FIX.4.3
513 RegistID Reference to Registration Instructions message for this Order. FIX.4.3
494 Designation Supplementary registration information for this Order FIX.4.3
1028 ManualOrderIndicator FIX.4.4
1029 CustDirectedOrder FIX.4.4
1030 ReceivedDeptID FIX.4.4 Y
1031 CustOrderHandlingInst FIX.4.4
1032 OrderHandlingInstSource FIX.4.4
1724 OrderOrigination FIX.5.0SP2 (135)
1725 OriginatingDeptID FIX.5.0SP2 (135)
1726 ReceivingDeptID FIX.5.0SP2 (135)
522 OwnerType FIX.5.0SP2 (135)
2679 OrderOwnershipIndicator Can be used to request change of order ownership. FIX.5.0SP2 (223)
BlockRepeating TrdRegTimestamps FIX.4.4
1685 ThrottleInst FIX.5.0SP2 (116)
1803 AuctionType Conditionally required for auction orders. FIX.5.0SP2 (131)
1804 AuctionAllocationPct FIX.5.0SP2 (131)
1810 ReleaseInstruction FIX.5.0SP2 (131)
1811 ReleaseQty FIX.5.0SP2 (131)
Block StandardTrailer Y FIX.2.7